 |
You are here: Homepage - Products > Vortex Cabinet Coolers
Vortex Cabinet Coolers
Keep Electrical Enclosures Cool, Clean and Protected
 
Today’s small and compact, multi-function electronic controls,variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and contribute to significant premature failures. Excessive heat causes components to “cook”, digital displays to misread, controls to drift, and breakers to trip below their rated loads. The result is often lost productivity from machine or line shutdowns. Fans often provide inadequate cooling and commonly pull in dirty, humid air creating another source of failure. Air conditioners require ongoing maintenance and are relatively expensive, large and difficult to install.
Vortex Cooler Enclosure Coolers are the affordable, low maintenance easy to install alternative for keeping enclosures cool and clean without Freon or other refrigerants!
Click here for the spreadsheet Vortex Cabinet Coolers!
Features & advantages
►Use standard factory air at 70 - 100psi (5-7BAR)
►No coolant、no electricity or chemicals
►Instant cold air in environmental chambers
►Maintenance free,no moving parts
►Compact and lightweight units
►Stainless steel construction
To cool NC/CNC Cabinets, Industrial Pc's , Closed-circuit TV cameras, Measuring instruments and recording devices
 
Vortex explained
A vortex tube spins compressed air to produce hot and cold air streams, generating temperatures below inlet temperature
Vortex Cooler Enclosure Coolers are powered by a Vortex tube – a unique device that creates a vortex from compressed air and separates it into hot and cold air streams. Here’s how it works. The vortex tube’s cylindrical generator causes the input compressed air to rotate reaching speeds up to 1,000,000 rpm as it is forced down the inner walls of the hot (longer) end of the vortex tube. At the end of the hot tube, a small portion of this air exits through a needle valve as hot air exhaust. The remaining air is forced back through the center of the incoming air stream at a slower speed. The heat in the slower moving air is transferred to the faster moving incoming air. This super-cooled air flows through the center of the generator and exits through the cold air exhaust port.
Please check: Manual Vortex Cabinet Coolers
|
 |
![[nl]](inc/lang/nl.gif){kind=small}
![[en]](inc/lang/en.gif){kind=small}
Products
Products
Vortex Cabinet Coolers